PS5 controller scratch removal

Restoring Your PS5 Controller: A Comprehensive Guide to Removing Scratches

The PlayStation 5 (PS5) controller is a sleek and innovative piece of gaming technology, but like any device, it’s susceptible to scratches over time. Whether you’re an avid gamer or a casual player, the sight of scratches on your PS5 controller can be disheartening. Fortunately, there are various methods and techniques to remove scratches and restore your controller to its former glory. In this comprehensive guide, we’ll explore step-by-step instructions, recommended tools and products, and additional tips for preventing future scratches.

Understanding Different Types of Scratches

Before diving into the solutions, it’s crucial to understand the different types of scratches your PS5 controller may encounter. Common types include:

  1. Surface Scratches: Superficial scratches that only affect the top layer of the controller’s surface.
  2. Deep Scratches: More severe scratches that penetrate the controller’s outer layer and may expose the underlying material.
  3. Scuffs and Marks: Light scuffs and marks that can be caused by friction or contact with other objects.

Each type of scratch requires a slightly different approach for effective removal. Let’s explore the methods for addressing each scenario.

Removing Surface Scratches

Surface scratches are the most common type and often affect the glossy surface of the controller. To remove these scratches, follow these steps:

Step 1: Clean the Controller

Before attempting any scratch removal, ensure that your controller is clean. Use a microfiber cloth and a mild cleaning solution to gently wipe away any dirt or debris.

Step 2: Toothpaste Method

  1. Apply a small amount of toothpaste (non-gel) to the scratched area.
  2. Using a soft, damp cloth, gently rub the toothpaste into the scratch using circular motions.
  3. Continue rubbing for 2-3 minutes, ensuring even coverage.
  4. Wipe away the toothpaste with a clean, damp cloth.
  5. Inspect the scratch, and repeat the process if necessary.

Step 3: Baking Soda Paste

  1. Create a paste by mixing baking soda with water until it forms a thick consistency.
  2. Apply the paste to the scratched area, ensuring it covers the entire affected region.
  3. Gently rub the paste into the scratch using a soft cloth or a cotton swab.
  4. Allow the paste to sit for a few minutes.
  5. Wipe away the paste with a damp cloth.
  6. Check the scratch, and repeat the process if needed.

Treating Deep Scratches

Deep scratches require a more intensive approach. Keep in mind that while these methods can improve the appearance of the scratch, they may not eliminate it.

Step 1: Clean the Controller

Begin by cleaning the controller as mentioned in the previous section to ensure a clear surface for treatment.

Step 2: Plastic Polish or Novus Scratch Remover

  1. Apply a small amount of plastic polish or Novus scratch remover to the scratched area.
  2. Use a soft cloth to gently rub the product into the scratch using circular motions.
  3. Continue rubbing for several minutes, applying moderate pressure.
  4. Wipe away any excess product with a clean, damp cloth.
  5. Inspect the scratch, and repeat the process if necessary.

Step 3: Sanding (for severe scratches)

  1. Start with a low-grit sandpaper (around 1000 grit) and lightly sand the scratched area in a circular motion.
  2. Gradually move to higher grit sandpaper (2000, 3000, and so on) until the scratch becomes less visible.
  3. Finish by polishing the sanded area with plastic polish to restore shine.
  4. Clean the controller thoroughly to remove any remaining residue.

Addressing Scuffs and Marks

Scuffs and marks are often superficial but can affect the overall appearance of the controller. Here’s how to deal with them:

Step 1: Clean the Controller

Ensure the controller is clean before addressing scuffs or marks.

Step 2: Magic Eraser

  1. Dampen a magic eraser with water.
  2. Gently rub the eraser over the scuffed area using light pressure.
  3. Continue until the scuff is no longer visible.
  4. Wipe away any residue with a clean, damp cloth.

Step 3: Isopropyl Alcohol

  1. Apply a small amount of isopropyl alcohol to a soft cloth.
  2. Gently rub the alcohol-soaked cloth over the scuffed area.
  3. Continue until the scuff is no longer visible.
  4. Wipe away any remaining alcohol with a clean, damp cloth.

Recommended Tools and Products

While the methods mentioned above are effective, using the right tools and products can enhance the scratch removal process. Here are some recommended items:

  1. Microfiber Cloth: Gentle and effective for cleaning and polishing without causing additional scratches.
  2. Toothpaste (Non-Gel): Acts as a mild abrasive to remove surface scratches.
  3. Baking Soda: When mixed with water, creates a paste that can help reduce the appearance of scratches.
  4. Plastic Polish or Novus Scratch Remover: Specifically designed for removing scratches from plastic surfaces.
  5. Sandpaper (Various Grits): For more severe scratches, use a progression of sandpaper grits to gradually smooth the surface.
  6. Magic Eraser: Effective for removing scuffs and marks without causing damage to the controller’s surface.
  7. Isopropyl Alcohol: Ideal for cleaning and removing light scuffs.

Additional Tips for Preventing Future Scratches

Prevention is key to maintaining the pristine appearance of your PS5 controller. Here are some tips to minimize the risk of scratches:

  1. Use a Protective Case: Invest in a high-quality protective case to shield your controller from accidental bumps and scratches.
  2. Store Properly: When not in use, store your controller in a safe and secure place to avoid unnecessary contact with other objects.
  3. Clean Regularly: Regularly clean your controller with a microfiber cloth to remove dirt and prevent scratches from forming.
  4. Be Mindful of Surfaces: When placing your controller down, choose smooth and clean surfaces to reduce the risk of scratches.
  5. Avoid Harsh Cleaning Agents: When cleaning your controller, use mild cleaning solutions to avoid damaging the surface.
  6. Consider Skins or Decals: Apply skins or decals to your controller for an additional layer of protection and personalization.
  7. Handle with Care: Treat your controller with care, avoiding unnecessary roughness or dropping.