How To Make An Xbox Controller Modded

This article shows how to customize your own Xbox controller. It includes step-by-step instructions on how to remove the stock buttons and replace them with custom ones.

The Xbox One X has some pretty cool features, but one of the most useful is the ability to customize the controller. You can change the shape of the triggers, add new buttons, and swap out the D-pad for something different. In this tutorial, we show you how to remove the stock button layout and replace it with our own. We use a combination of hot glue and tape to create custom controls.

If you want to customize your own Xbox controller, then you should know that there are two ways to go about doing it. The first method involves removing the stock buttons and replacing them with custom ones. The second method involves using a third-party program called Controller Mapper. Both methods work well, but if you choose to use Controller Mapper, then you will be able to save yourself some time because you won’t have to worry about soldering wires onto the controller.

The Xbox One controller has been criticized for being too complicated to use. If you want to change the look of your controller, then you should be able to do so without having to buy a new one. You can easily modify your existing controller by removing the stock buttons and replacing them with custom ones. 

The Xbox One controller has a lot of customizable options. You can change the color of the thumbsticks, D-pad, triggers, and face buttons. If you want to add extra features, you can get a wireless adapter and attach it to the back of the controller.

Remove the original buttons

First, you need to remove the stock buttons. There are two ways to do this. One method involves removing the screws holding the top plate onto the base. The other method involves unscrewing the four screws that hold the faceplate onto the base. Once the faceplate is removed, you will see the wires running through the holes. These wires connect the buttons to the microcontroller board inside the controller. Simply cut the wires where they run through the holes. Then, solder new wires to the back side of each button. Finally, reassemble the faceplate and screw it into place.

Cut out the plastic shell

Next, you will need to make a template for cutting out the plastic shell. This template should be made by tracing the outline of the controller onto paper. After making the template, use a utility knife to carefully cut along the lines. Be careful not to cut too deep as you might damage the circuit board. If you accidentally cut through the circuit board, simply peel off the damaged part and replace it with a new one.

Replace the buttons with whatever you like

Now that you have removed the top half of the controller, you can start replacing the buttons with what you would like. First, remove the four small black buttons located at the bottom of the controller. Then, take the two large red buttons and place them where you would like them to go. Finally, replace the four smaller white buttons with the ones you want.

You can easily swap out the stock buttons for something more unique. The process is easy enough that anyone can follow along. Just be sure to use a razor blade to cut away the plastic around the button before removing it from the controller.

Reassemble the controller

Once you have finished placing the buttons, reattach the top half of the control panel by pressing down on the back of the controller until it snaps into place.


Now that you have completed the project, enjoy playing games with your new controller!

If you want to customize your own Xbox controller, then you should know that there are two ways to go about doing it. The first option is to buy a pre-made one from Dyeport or other online retailers. However, if you want to save some cash, then you can always build your own. 

The Xbox One controller has been redesigned from the ground up. Gone are the d-pad and analog sticks found on previous controllers. In their place are two thumbsticks, one trigger button, and four face buttons. You can customize your controller using the included software. There are three different ways to change the look of the controller. First, you can choose between the default colors, which include black, red, blue, green, yellow, orange, purple, pink, gray, silver, and white. Second, you can use the color picker tool to select a new color. Finally, you can create your own custom design. To do this, you first open the program and then click on the Create Custom Design option. Next, you can either draw your own design or import a picture from your computer. Once you’ve created your design, you can save it to your device or share it online.